October 29, 2026
Solar Garden Lights Wholesale: Buyer’s Guide to Stake, Path and Decorative Lights
A wholesale garden lighting range is rarely built from one product type. Most buyers combine stake lights that add colour to beds and lawns, pathway lights that mark where people walk, and decorative pieces that create a focal point. Those three families look similar in a catalogue, but they differ in battery, panel, waterproof rating and how they are installed. This guide is for retailers, importers, garden centers, e-commerce sellers and regional distributors who need to choose between them. It compares real BOMATERIAL models and does not repeat the product descriptions. For the full listings and to ask about specific models, see the Solar Garden Lights category, Solar Pathway Lights and Solar Decorative Lights pages.
The three families in a wholesale solar garden range
| Family | What it does | Models covered here | Main selection question |
|---|---|---|---|
| Garden stake lights | Add colour and shape to flowerbeds, lawns and planters | BM-SG001 to BM-SG007 | Which designs will your customers pick? |
| Pathway lights | Mark paths, steps, posts and edges | BM-SP001 to BM-SP005 | Which installation style fits the property? |
| Decorative garden lights | Create a feature effect, such as flame, dandelion or hanging lights | BM-SDC001 to BM-SDC004 | Is the waterproof rating right for the position? |
Solar garden stake lights
The garden stake range (BM-SG001 to BM-SG007) covers flowers, butterflies, mushrooms, animals, birds, bees and fiber optic designs. On the product pages the whole family lists a shared electrical set-up: a 2 V polycrystalline panel rated 80 to 100 mA, a 1.2 V 600 mAh Ni-MH battery, an IP65 rating and 8 to 10 hours of working time (8 to 12 hours on the flower stake). All use ground-stake installation.
For a buyer, that similarity is useful. The electronics are largely consistent across the family, so the choice is mainly about design, figurine material and how many LEDs it carries, which ranges from 1 LED on the bee and bird stakes to 6 to 20 LEDs on the mushroom stake. Lighting behaviour also varies: the bee, bird and animal stakes list steady-on with light-sensor control, while the flower, butterfly and mushroom stakes list steady-on, flashing or colour-changing options depending on version. A good first test is the flower stake (BM-SG001) and the mushroom stake (BM-SG003), which suit different shelf looks.
Solar pathway lights
The five pathway models are more varied than the stake family, because each solves a different installation problem:
- Stake path lights (BM-SP001): a pole-style lamp of about 35 to 45 cm, in 3000K or 6000K, installed by ground stake.
- Bollard lights (BM-SP002): a lamp head of 13 x 13 x 4.4 cm for fence posts, deck posts, gate pillars and pillar tops.
- Lantern path lights (BM-SP003): classic, hanging, colourful and flame-effect designs on a ground or hanging stake.
- Disk or in-ground lights (BM-SP004): low-profile units for steps, decks, driveway edges and pathway edges.
- Motion sensor path lights (BM-SP005): 92 LEDs, a built-in PIR sensor, three lighting modes and USB backup charging as well as solar charging.
Notably, BM-SP005 is the only model in this guide that lists a lithium battery (1200 mAh); the others list Ni-MH. Most pathway models list a monocrystalline panel, unlike the stake and decorative families.
Decorative solar garden lights
The decorative category (BM-SDC001 to BM-SDC004) is built around effects rather than function: firefly lights with swaying wire stems, dandelion lights with four glowing heads at about 70 cm, flame lights with a flickering effect, and hanging lights in willow, ball, lantern, vine basket and bulb styles. All list a 2 V polycrystalline panel and a 1.2 V 600 mAh Ni-MH battery.
One point deserves attention. The firefly lights list a waterproof rating of IP33, while the other three decorative models list IP65. Check this before choosing the firefly model for exposed positions.
Comparison of verified BOMATERIAL models
| Model | Type | Panel (as listed) | Battery (as listed) | Waterproof rating | Working time | Installation |
|---|---|---|---|---|---|---|
| BM-SG001 | Flower stake | 2 V / 80 mA, polycrystalline | 1.2 V 600 mAh Ni-MH | IP65 | 8 to 12 h | Ground stake |
| BM-SG003 | Mushroom stake | 2 V / 80 to 100 mA, polycrystalline | 1.2 V 600 mAh Ni-MH | IP65 | 8 to 10 h | Ground stake |
| BM-SP001 | Stake path light | 2 V / 200 mA, monocrystalline | 1.2 V 1000 mAh AAA Ni-MH | IP65 | 6 to 12 h | Ground stake |
| BM-SP002 | Bollard light | 2 V 0.3 W, monocrystalline | 1.2 V 800 mAh AA Ni-MH | IP65 | Up to 12 h | Post top |
| BM-SP003 | Lantern path light | 2 V / 80 to 120 mA, polycrystalline | 1.2 V 600 mAh Ni-MH | IP65 | 8 to 10 h | Ground or hanging stake |
| BM-SP004 | Disk in-ground light | 2 V / 150 mA, monocrystalline | 1.2 V 700 mAh AAA Ni-MH | IP65 | 6 to 12 h | Ground, deck, step or edge |
| BM-SP005 | Motion sensor path light | 5.5 V / 240 mA, monocrystalline | 1200 mAh lithium | IP65 | 6 to 8 h constant light; up to 200 activations in motion mode | Ground; USB backup charging |
| BM-SDC001 | Firefly light | 2 V / 150 mA, polycrystalline | 1.2 V 600 mAh AA Ni-MH | IP33 | About 24 h | Ground stake |
| BM-SDC002 | Dandelion light | 2 V, polycrystalline | 1.2 V 600 mAh AA Ni-MH | IP65 | 8 to 15 h | Ground stake |
| BM-SDC003 | Flame light | 2 V, polycrystalline | 1.2 V 600 mAh AA Ni-MH | IP65 | 12 to 15 h | Ground stake; 4 or 6 piece sets optional |
| BM-SDC004 | Hanging decorative light | 2 V, polycrystalline | 1.2 V 600 mAh AA Ni-MH | IP65 | 8 to 12 h | Hanging |
Source: BOMATERIAL product pages. Panel ratings are shown as listed. Working times depend on sunlight, so treat them as listed specifications and not as test results.
Materials, panels, batteries and lighting modes
Ask the same four questions about every model:
- Materials: stake products list ABS solar panel housings with stainless steel stakes and resin, silicone, fabric or plastic decorative parts. Pathway lights range from ABS and PC to stainless steel, aluminum and glass, which affects both appearance and handling.
- Panel: note whether the panel is polycrystalline or monocrystalline and its listed rating, since both vary by family.
- Battery: chemistry and capacity differ between families, from 600 mAh Ni-MH on most stakes to 1200 mAh lithium on BM-SP005.
- Lighting mode: several models use automatic light control, others offer flashing, colour changing, flame effect or motion sensing.
Waterproof ratings and outdoor suitability
IP65 is the most common listed rating across the models above. The first digit describes protection against solid objects and dust, and the second protection against water, so IP65 is rated against dust and water jets. IP33 on the firefly lights is a much lower level of protection and fits sheltered or lightly exposed spots better than open beds. Treat these as ratings listed on the product pages, and ask for a test report if your market requires one.
As illustrative examples only: stake lights suit planted beds and lawn borders, bollard lights suit posts and gate pillars, disk lights suit steps and deck edges, and hanging lights suit pergolas and trees. These are application ideas, not descriptions of completed projects.
Choosing products for your retail channel
| Channel | What usually matters | Where to start (illustrative) |
|---|---|---|
| Garden centers | Colour and display impact beside live plants, and seasonal interest | Stake lights such as BM-SG001 and BM-SG003, plus flame or dandelion lights |
| Hardware and DIY retailers | Functional pathway and post products with clear installation | BM-SP001, BM-SP002 and BM-SP004 |
| E-commerce sellers | Clear variants and photogenic products | Designs with option lists, such as flower, animal or hanging styles; sets of 4 or 6 on the flame light |
| Importers and regional distributors | Range breadth, controlled SKU counts and adaptation to local markets | One lead model per family, then add by market; ask about OEM/ODM |
Retail assortment and product combinations
This is an illustrative starting range, not a sales forecast:
- Starter range: two stake designs (BM-SG001 and BM-SG004), one path light (BM-SP001), one bollard (BM-SP002) and one decorative effect (BM-SDC003).
- Extended range: add BM-SP005 for security-minded buyers, BM-SP004 for steps and decks, and BM-SDC004 for hanging displays.
- Display tip: group stake lights by design, and keep pathway lights with their installation type clearly labelled.
If you also plan a holiday range, our solar Christmas lights buying guide covers the seasonal side. Several garden product pages mention OEM/ODM support, for example the bee and mushroom stake lights.
MOQ, stock and production lead time
- MOQ: 1 carton per model.
- Stock: ready stock is available. Confirm availability of specific models when you inquire.
- Bulk order production lead time: 15 to 20 days after order confirmation.
- OEM/ODM production lead time: 15 to 20 days after order confirmation.
Production lead times do not include international transportation. BOMATERIAL coordinates production through manufacturing partners. Carton quantities and packing details are confirmed per model in the quotation.
Wholesale purchasing checklist
- List the models and exact versions you want, including design, colour and set size.
- Confirm panel type, battery chemistry and capacity for each version.
- Check the listed waterproof rating against where customers will install it.
- Confirm lighting mode and any sensor function.
- Ask for carton quantity, carton size and packaging per model.
- Ask for any test report your market requires.
- Decide on standard packaging or OEM/ODM.
- State quantities (at least 1 carton per model), destination and target delivery date.
When you are ready, browse the Solar Garden Lights category and send a wholesale inquiry with your model list and destination.
Frequently asked questions
Do all solar garden lights have the same waterproof rating?
No. Most listed models are IP65, but the firefly lights (BM-SDC001) list IP33, so check each model.
Can I combine stake, pathway and decorative models in one order?
Yes. The MOQ is 1 carton per model, so you can mix models from different families.
Does the lead time include shipping?
No. The 15 to 20 days applies to production after order confirmation and excludes international transportation.